P1503 – BMW DTC

BMW DTC P1503 – Idle-Speed Control Valve Closing Solenoid Control Circuit Low

DTC P1503 meaning on BMW

DTC P1503 indicates an issue with the Idle-Speed Control Valve Closing Solenoid Control Circuit on a BMW. This fault code is triggered when the Engine Control Module (ECM) detects a low voltage condition in the circuit responsible for controlling the idle-speed control valve closing solenoid.

BMW DTC P1503 symptoms

Symptoms of DTC P1503 on a BMW may include:

• Engine stalling at idle
• Rough or erratic idle speed
• Poor acceleration response
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P1503 causes

Common causes of DTC P1503 on a BMW include:

• Faulty idle-speed control valve closing solenoid
• Wiring or connector issues in the control circuit
• ECM software or hardware problems

BMW DTC P1503 seriousness

While DTC P1503 may not cause immediate drivability issues, it can lead to poor engine performance and potentially affect the overall operation of the vehicle. Ignoring this fault code may result in further damage to engine components over time.

How to diagnose DTC P1503 on BMW

To diagnose DTC P1503 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the idle-speed control valve closing solenoid and its wiring for any visible damage
3. Check the voltage and continuity in the control circuit using a multimeter
4. Perform a thorough visual inspection of related components

How to fix DTC P1503 on BMW

To fix DTC P1503 on a BMW, the following steps may be taken:

1. Replace the faulty idle-speed control valve closing solenoid
2. Repair or replace any damaged wiring or connectors in the control circuit
3. Clear the fault code and perform a test drive to verify the repair
4. If the issue persists, further diagnosis may be required to address underlying problems

How to erase DTC P1503 on BMW

To erase DTC P1503 on a BMW, follow these steps:

1. Use a diagnostic scanner to access the ECM and clear the fault code
2. Ensure that the underlying issue causing the fault code has been addressed
3. Perform a test drive to confirm that the fault code does not return

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.