P1509 – BMW DTC

BMW DTC P1509 – Idle-Speed Control Valve Opening Solenoid Control Circuit Electrical

DTC P1509 meaning on BMW

DTC P1509 on a BMW indicates an issue with the Idle-Speed Control Valve Opening Solenoid Control Circuit Electrical. This fault code is triggered when the Engine Control Module (ECM) detects a problem with the electrical circuit that controls the opening and closing of the idle-speed control valve solenoid.

BMW DTC P1509 symptoms

Symptoms of DTC P1509 on a BMW may include:

• Engine stalling at idle
• High or fluctuating idle speed
• Poor acceleration
• Check Engine Light illuminated on the dashboard

BMW DTC P1509 causes

Common causes of DTC P1509 on a BMW include:

• Faulty idle-speed control valve solenoid
• Wiring or connector issues in the control circuit
• ECM software or hardware problems

BMW DTC P1509 seriousness

DTC P1509 should not be ignored as it can lead to drivability issues and potential engine damage if left unresolved. It is recommended to address this fault code promptly to ensure the proper functioning of the idle-speed control system.

How to diagnose DTC P1509 on BMW

To diagnose DTC P1509 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors in the idle-speed control valve solenoid circuit for any damage or corrosion
3. Test the idle-speed control valve solenoid for proper operation
4. Check the ECM for any software updates or hardware malfunctions

How to fix DTC P1509 on BMW

To fix DTC P1509 on a BMW, the following steps may be taken:

1. Repair or replace any damaged wiring or connectors in the idle-speed control valve solenoid circuit
2. Replace the idle-speed control valve solenoid if it is found to be faulty
3. Update the ECM software if necessary

How to erase DTC P1509 on BMW

After addressing the underlying issue causing DTC P1509 on a BMW, the fault code can be cleared using a diagnostic scanner. The scanner can be used to erase the code and reset the Check Engine Light. It is important to verify that the issue has been resolved before clearing the fault code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.