P1582 – BMW DTC

BMW DTC P1582 – Engine Oil Pump Control Circuit High

DTC P1582 meaning on BMW

DTC P1582 on a BMW indicates a fault in the Engine Oil Pump Control Circuit, specifically a high voltage condition. This fault code is triggered when the Engine Control Module (ECM) detects that the voltage in the oil pump control circuit is higher than the specified range.

BMW DTC P1582 symptoms

Symptoms of DTC P1582 on a BMW may include:

  • Check Engine Light illuminated
  • Engine running rough
  • Loss of power
  • Engine stalling

BMW DTC P1582 causes

The common causes of DTC P1582 on a BMW include:

  • Faulty oil pump control module
  • Wiring issues in the oil pump control circuit
  • Defective Engine Control Module (ECM)

BMW DTC P1582 seriousness

DTC P1582 should be addressed promptly as it can lead to engine performance issues and potential damage if left unresolved. Ignoring this fault code may result in engine overheating or oil pressure problems.

How to diagnose DTC P1582 on BMW

To diagnose DTC P1582 on a BMW, a mechanic would typically perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
  2. Inspect the oil pump control module and wiring for any visible damage
  3. Test the oil pump control circuit for proper voltage and continuity
  4. Check the ECM for any related faults

How to fix DTC P1582 on BMW

To fix DTC P1582 on a BMW, the following steps may be taken:

  1. Replace the faulty oil pump control module if necessary
  2. Repair any damaged wiring in the oil pump control circuit
  3. If the ECM is found to be defective, it may need to be replaced or reprogrammed

How to erase DTC P1582 on BMW

After the issue causing DTC P1582 on a BMW has been resolved, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and erase the stored fault code from the ECM’s memory.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.