P15E3 – BMW DTC

BMW DTC P15E3 – Charge Air Cooler Coolant Pump Cut-Off, Overcurrent

DTC P15E3 meaning on BMW

The DTC P15E3 code on a BMW indicates a Charge Air Cooler Coolant Pump Cut-Off due to overcurrent. This means that the control module has detected excessive current flowing through the charge air cooler coolant pump circuit, leading to the pump being shut off to prevent damage or safety hazards.

BMW DTC P15E3 symptoms

Symptoms of the DTC P15E3 code on a BMW may include:

• Check Engine Light (MIL) illuminated
• Reduced engine performance
• Overheating of the charge air cooler system
• Engine stalling or rough idling

BMW DTC P15E3 causes

Common causes of the DTC P15E3 code on a BMW include:

• Faulty charge air cooler coolant pump
• Short circuit or open circuit in the pump wiring
• Defective control module
• Low coolant level in the system

BMW DTC P15E3 seriousness

The DTC P15E3 code should be addressed promptly as it can lead to engine performance issues and potential overheating of the charge air cooler system. Ignoring this code may result in further damage to engine components and reduced vehicle drivability.

How to diagnose DTC P15E3 on BMW

To diagnose the DTC P15E3 code on a BMW, a mechanic should perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the charge air cooler coolant pump for any visible damage or signs of malfunction
3. Check the wiring harness and connectors for any loose connections or shorts
4. Test the charge air cooler coolant pump for proper operation using a multimeter

How to fix DTC P15E3 on BMW

To fix the DTC P15E3 code on a BMW, the following steps can be taken:

1. Replace the faulty charge air cooler coolant pump if necessary
2. Repair any damaged wiring or connectors in the pump circuit
3. Ensure the coolant level in the system is at the proper level
4. If the issue persists, consider replacing the control module

How to erase DTC P15E3 on BMW

After addressing the underlying cause of the DTC P15E3 code on a BMW, the code can be erased using a diagnostic scanner. Follow these steps:

1. Connect the diagnostic scanner to the vehicle’s OBD-II port
2. Select the option to clear fault codes from the control module
3. Follow the on-screen prompts to erase the DTC P15E3 code
4. Verify that the code has been successfully cleared by rescanning the vehicle

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.