P1633 – BMW DTC

BMW DTC P1633 – Throttle Valve Adaptation Limp-Home Position Unknown (Bank 1)

DTC P1633 meaning on BMW

DTC P1633 on a BMW indicates an issue with the Throttle Valve Adaptation Limp-Home Position being unknown in Bank 1. This means that the engine control module (ECM) is unable to determine the correct position of the throttle valve, which can lead to performance issues and potentially unsafe driving conditions.

BMW DTC P1633 symptoms

Symptoms of DTC P1633 on a BMW may include:

• Reduced engine power
• Engine stalling
• Difficulty accelerating
• Check Engine Light illuminated

BMW DTC P1633 causes

The possible causes of DTC P1633 on a BMW include:

• Throttle valve position sensor malfunction
• Throttle valve adaptation failure
• Wiring or connector issues
• ECM software glitch

BMW DTC P1633 seriousness

DTC P1633 should be taken seriously as it can lead to unsafe driving conditions and potential engine damage if not addressed promptly. It is recommended to diagnose and fix the issue as soon as possible.

How to diagnose DTC P1633 on BMW

To diagnose DTC P1633 on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes
2. Inspect the throttle valve position sensor and wiring for any visible damage
3. Check the throttle valve adaptation values using diagnostic software
4. Perform a throttle valve adaptation reset procedure

How to fix DTC P1633 on BMW

To fix DTC P1633 on a BMW, you can try the following solutions:

1. Replace the throttle valve position sensor if faulty
2. Perform a throttle valve adaptation reset
3. Check and repair any damaged wiring or connectors
4. Update the ECM software if necessary

How to erase DTC P1633 on BMW

To erase DTC P1633 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM memory. After fixing the underlying issue causing the fault code, you can then reset the codes to turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.