P16FD – BMW DTC

BMW DTC P16FD – Sensor Power Supply ‘B’ Circuit Range/Performance

DTC P16FD meaning on BMW

The Diagnostic Trouble Code (DTC) P16FD for BMW refers to the Sensor Power Supply ‘B’ Circuit Range/Performance issue. This code indicates that there is a problem with the power supply to a specific sensor in the vehicle.

BMW DTC P16FD symptoms

Symptoms of the BMW DTC P16FD may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced engine performance
• Engine stalling or rough idling
• Decreased fuel efficiency

BMW DTC P16FD causes

Common causes of the BMW DTC P16FD include:

• Faulty sensor power supply
• Wiring or connector issues in the sensor circuit
• Defective sensor
• Issues with the Engine Control Module (ECM)

BMW DTC P16FD seriousness

The BMW DTC P16FD should be addressed promptly to prevent potential engine performance issues and further damage. Ignoring this code may lead to more severe problems and could affect the overall drivability of the vehicle.

How to diagnose DTC P16FD on BMW

To diagnose the DTC P16FD on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s ECM.
2. Inspect the sensor power supply circuit for any visible damage or loose connections.
3. Test the sensor’s power supply voltage using a multimeter to ensure it is within the specified range.
4. If necessary, perform a continuity test on the wiring harness to check for any breaks or shorts.

How to fix DTC P16FD on BMW

To fix the DTC P16FD on a BMW, you can try the following:

1. Repair or replace any damaged wiring or connectors in the sensor circuit.
2. Replace the faulty sensor if it is determined to be the cause of the issue.
3. If the ECM is suspected to be the problem, have it tested and potentially replaced by a qualified technician.
4. Clear the fault codes using a diagnostic scanner after the repairs have been completed.

How to erase DTC P16FD on BMW

To erase the DTC P16FD on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Access the scanner’s menu to clear the fault codes stored in the ECM.
3. Follow the on-screen instructions to erase the DTC P16FD code.
4. Once the code has been cleared, start the vehicle to ensure the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.