P1765 – BMW DTC

BMW DTC P1765 – CAN Throttle Valve

DTC P1765 meaning on BMW

The Diagnostic Trouble Code (DTC) P1765 for BMW refers to an issue with the CAN Throttle Valve. This code indicates a problem with the communication between the throttle valve and the Engine Control Module (ECM) through the Controller Area Network (CAN) bus system.

BMW DTC P1765 symptoms

Symptoms of DTC P1765 on a BMW may include:

  • Engine stalling or rough idling
  • Lack of power or acceleration
  • Check Engine Light (CEL) illuminated on the dashboard
  • Reduced fuel efficiency

BMW DTC P1765 causes

Common causes of DTC P1765 on a BMW include:

  • Faulty throttle valve position sensor
  • Issues with the throttle valve actuator
  • Wiring or connection problems in the CAN bus system
  • ECM software issues

BMW DTC P1765 seriousness

DTC P1765 should not be ignored as it can lead to drivability issues and potential safety concerns. If left unresolved, it may result in further damage to engine components and affect the overall performance of the vehicle.

How to diagnose DTC P1765 on BMW

To diagnose DTC P1765 on a BMW, a mechanic would typically perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
  2. Inspect the throttle valve position sensor and wiring for any visible damage
  3. Check the throttle valve actuator for proper operation
  4. Perform a CAN bus system test to identify communication issues

How to fix DTC P1765 on BMW

To fix DTC P1765 on a BMW, the following steps may be taken:

  1. Replace the faulty throttle valve position sensor or throttle valve actuator
  2. Repair any damaged wiring or connections in the CAN bus system
  3. Update the ECM software to the latest version
  4. Clear the fault codes and perform a test drive to ensure the issue is resolved

How to erase DTC P1765 on BMW

To erase DTC P1765 on a BMW, the fault codes can be cleared using a diagnostic scanner. After fixing the underlying issue causing the fault code, the scanner can be used to reset the ECM and clear the code. It is important to ensure that the problem has been resolved before clearing the code to prevent it from reoccurring.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.