BMW DTC P17D8 – Torque Converter Clutch Pressure Control Solenoid Sense Circuit Current Too High
DTC P17D8 meaning on BMW
The DTC P17D8 code on a BMW indicates that the Torque Converter Clutch Pressure Control Solenoid Sense Circuit is detecting a current that is higher than the specified limit. This typically points to an issue with the solenoid or its related circuitry.
BMW DTC P17D8 symptoms
Symptoms of the DTC P17D8 code on a BMW may include:
- Harsh shifting
- Transmission slipping
- Decreased fuel efficiency
- Illuminated Check Engine Light
BMW DTC P17D8 causes
Common causes of the DTC P17D8 code on a BMW include:
- Faulty Torque Converter Clutch Pressure Control Solenoid
- Wiring or connector issues in the solenoid circuit
- Low transmission fluid level or poor quality fluid
- Internal transmission problems
BMW DTC P17D8 seriousness
Ignoring the DTC P17D8 code on a BMW can lead to further transmission issues and potential damage. It is important to address this code promptly to prevent more severe problems and ensure the vehicle’s drivability and safety.
How to diagnose DTC P17D8 on BMW
To diagnose the DTC P17D8 code on a BMW, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes and data related to the transmission system.
- Inspect the Torque Converter Clutch Pressure Control Solenoid and its wiring for any visible damage or corrosion.
- Check the transmission fluid level and condition.
- Perform a test drive to observe the transmission’s behavior and confirm the symptoms.
How to fix DTC P17D8 on BMW
To fix the DTC P17D8 code on a BMW, the following steps may be taken:
- Replace the Torque Converter Clutch Pressure Control Solenoid if it is found to be faulty.
- Repair any damaged wiring or connectors in the solenoid circuit.
- Ensure the transmission fluid is at the correct level and of the recommended quality.
- If internal transmission issues are suspected, further inspection or repair may be necessary.
How to erase DTC P17D8 on BMW
After addressing the underlying cause of the DTC P17D8 code on a BMW, the code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow for a fresh monitoring of the system to ensure the issue has been resolved.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.