BMW DTC P182E – TCM Internal Temperature Sensor / Internal Switch-On Temperature Sensor/Transmission Fluid Temperature Sensor – Correlation in Medium Temperature Range
DTC P182E meaning on BMW
DTC P182E on a BMW refers to a fault with the Transmission Control Module (TCM) Internal Temperature Sensor, Internal Switch-On Temperature Sensor, or Transmission Fluid Temperature Sensor in the medium temperature range. This diagnostic trouble code indicates a correlation issue between these sensors within the specified temperature range.
BMW DTC P182E symptoms
Symptoms of DTC P182E on a BMW may include erratic shifting behavior, transmission slipping, harsh shifting, or the transmission going into limp mode. Additionally, the vehicle may display a warning light on the dashboard indicating a transmission fault.
BMW DTC P182E causes
The causes of DTC P182E on a BMW can vary but commonly include a faulty internal temperature sensor, wiring issues, or a malfunction within the TCM itself. Other potential causes may include low transmission fluid levels, a defective transmission fluid temperature sensor, or a problem with the transmission control module.
BMW DTC P182E seriousness
DTC P182E should be taken seriously as it can lead to drivability issues and potential damage to the transmission if left unresolved. Ignoring this fault code may result in further transmission problems and could compromise the safety and performance of the vehicle.
How to diagnose DTC P182E on BMW
To diagnose DTC P182E on a BMW, a diagnostic scan tool capable of reading transmission fault codes is required. The technician will need to retrieve the specific fault code, check the transmission fluid level and condition, inspect the wiring harness for any damage, and test the internal temperature sensors for proper operation.
Possible diagnostic steps:
- Perform a full system scan to retrieve the fault code
- Check transmission fluid level and condition
- Inspect wiring harness for damage or corrosion
- Test internal temperature sensors for proper resistance values
How to fix DTC P182E on BMW
Fixing DTC P182E on a BMW may involve replacing the faulty internal temperature sensor, internal switch-on temperature sensor, or transmission fluid temperature sensor. Additionally, repairing any damaged wiring or addressing issues within the TCM may be necessary to resolve the correlation problem.
Possible repair steps:
- Replace the faulty internal temperature sensor
- Replace the internal switch-on temperature sensor
- Replace the transmission fluid temperature sensor
- Repair or replace damaged wiring harness
- Address any TCM malfunctions
How to erase DTC P182E on BMW
Once the underlying issue causing DTC P182E on a BMW has been resolved, the fault code can be cleared using a diagnostic scan tool. After the repair has been completed, the technician can erase the fault code from the TCM memory, resetting the system and turning off the warning light on the dashboard.
Steps to erase DTC P182E:
- Repair the root cause of the fault code
- Use a diagnostic scan tool to clear the fault code
- Verify that the fault code has been successfully erased
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.