P1A98 – BMW DTC

BMW DTC P1A98 – Drive Motor ‘A’ Control Module 5V Sensor Power Supply Circuit ‘A High

DTC P1A98 meaning on BMW

The DTC P1A98 error code on BMW vehicles indicates an issue with the Drive Motor ‘A’ Control Module 5V Sensor Power Supply Circuit ‘A’ being too high. This fault typically points to a problem with the power supply circuit for the sensor within the drive motor control module.

BMW DTC P1A98 symptoms

Symptoms of the BMW DTC P1A98 code may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced power or performance
• Vehicle may go into a limp mode

BMW DTC P1A98 causes

Common causes of the BMW DTC P1A98 code include:

• Faulty drive motor control module
• Wiring or connection issues in the sensor power supply circuit
• Internal sensor failure

BMW DTC P1A98 seriousness

The DTC P1A98 error code should be addressed promptly to prevent potential drivability issues and further damage to the vehicle. Ignoring this fault could lead to performance issues and potentially unsafe driving conditions.

How to diagnose DTC P1A98 on BMW

To diagnose the DTC P1A98 code on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
2. Inspect the wiring and connections in the sensor power supply circuit for any damage or loose connections.
3. Test the sensor power supply circuit for proper voltage levels.
4. If necessary, perform a component test on the drive motor control module and sensor to identify any faulty components.

How to fix DTC P1A98 on BMW

To fix the DTC P1A98 code on a BMW, consider the following steps:

1. Repair or replace any damaged wiring or connections in the sensor power supply circuit.
2. Replace the drive motor control module if it is found to be faulty.
3. If the sensor is determined to be the issue, replace it with a new one.
4. Clear the fault codes using a diagnostic scanner after completing the repairs.

How to erase DTC P1A98 on BMW

To erase the DTC P1A98 code on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s onboard computer system.
2. Select the option to clear the fault codes stored in the system.
3. Follow the prompts on the scanner to confirm the deletion of the DTC P1A98 code.
4. Once the code is successfully cleared, verify that the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.