BMW DTC P1B56 – Drive Motor ‘A’ Phase W Current Sensor Circuit Current Out of Range Low
DTC P1B56 meaning on BMW
DTC P1B56 on a BMW indicates an issue with the Drive Motor ‘A’ Phase W Current Sensor Circuit, specifically that the current is out of range low. This fault code typically points to a problem with the current sensor or the circuit that monitors the current in the drive motor phase W.
BMW DTC P1B56 symptoms
Symptoms of DTC P1B56 on a BMW may include:
- Check Engine Light (MIL) illuminated
- Reduced power or performance
- Vehicle may go into a reduced power mode
BMW DTC P1B56 causes
Common causes of DTC P1B56 on a BMW include:
- Failed drive motor current sensor
- Wiring or connection issues in the current sensor circuit
- Faulty drive motor phase W
BMW DTC P1B56 seriousness
The seriousness of DTC P1B56 on a BMW depends on the underlying cause. Ignoring this fault code can lead to drivability issues and potential damage to the drive motor components. It is recommended to address this issue promptly to prevent further problems.
How to diagnose DTC P1B56 on BMW
To diagnose DTC P1B56 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault code and any related codes
- Inspect the drive motor current sensor and its wiring for any visible damage
- Check the drive motor phase W for proper operation
- Perform a circuit test to verify the current sensor readings
How to fix DTC P1B56 on BMW
To fix DTC P1B56 on a BMW, you can consider the following actions:
- Replace the drive motor current sensor if faulty
- Repair any damaged wiring or connections in the current sensor circuit
- If the drive motor phase W is faulty, replace or repair as necessary
- Clear the fault codes and test drive the vehicle to ensure the issue is resolved
How to erase DTC P1B56 on BMW
To erase DTC P1B56 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s system. After performing the necessary repairs and confirming the issue is resolved, you can reset the codes to turn off the Check Engine Light and ensure the fault does not reoccur.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.