P1B6E – BMW DTC

BMW DTC P1B6E – Drive Motor ‘A’ Temperature Sensor ‘B’ Circuit High

DTC P1B6E meaning on BMW

The DTC P1B6E code on a BMW indicates an issue with the Drive Motor ‘A’ Temperature Sensor ‘B’ Circuit registering a high voltage signal. This fault code is specific to the temperature sensor circuit associated with the drive motor ‘A’ in the vehicle.

BMW DTC P1B6E symptoms

Symptoms of the DTC P1B6E code on a BMW may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced power or performance
• Abnormal temperature readings on the dashboard

BMW DTC P1B6E causes

Common causes of the DTC P1B6E code on a BMW include:

• Faulty drive motor temperature sensor ‘B’
• Wiring or connection issues in the temperature sensor circuit
• Internal control module faults

BMW DTC P1B6E seriousness

The DTC P1B6E code should be addressed promptly as it can affect the performance and drivability of the vehicle. Ignoring this fault may lead to further damage to the drive motor or other related components.

How to diagnose DTC P1B6E on BMW

To diagnose the DTC P1B6E code on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
2. Inspect the drive motor ‘A’ temperature sensor ‘B’ and its wiring for any visible damage or corrosion.
3. Test the temperature sensor for proper resistance values and functionality.
4. Check the control module for any internal faults or programming issues.

How to fix DTC P1B6E on BMW

To fix the DTC P1B6E code on a BMW, consider the following steps:

1. Replace the drive motor temperature sensor ‘B’ if it is found to be faulty.
2. Repair any damaged wiring or connections in the temperature sensor circuit.
3. If the control module is at fault, reprogram or replace it as necessary.
4. Clear the fault codes using a diagnostic scanner after the repairs are completed.

How to erase DTC P1B6E on BMW

To erase the DTC P1B6E code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Access the scanner’s menu to clear the fault codes stored in the control module.
3. Follow the on-screen prompts to erase the DTC P1B6E code from the system.
4. Verify that the code has been successfully cleared by rescanning the vehicle.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.