P1B75 – BMW DTC

BMW DTC P1B75 – Drive Motor ‘A’ Temperature Sensor ‘B’ Circuit Range/Performance

DTC P1B75 meaning on BMW

The DTC P1B75 error code on BMW vehicles indicates an issue with the Drive Motor ‘A’ Temperature Sensor ‘B’ Circuit Range/Performance. This means that the vehicle’s onboard computer has detected a problem with the temperature sensor associated with the drive motor, specifically sensor ‘B’. The sensor is not providing the expected data range or is not performing within the specified parameters.

BMW DTC P1B75 symptoms

Symptoms of the BMW DTC P1B75 error code may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced power or performance
• Abnormal temperature readings on the dashboard
• In some cases, the vehicle may go into a limp mode

BMW DTC P1B75 causes

Common causes of the BMW DTC P1B75 error code include:

• Faulty drive motor temperature sensor ‘B’
• Wiring or connection issues in the temperature sensor circuit
• Software or programming issues

BMW DTC P1B75 seriousness

The BMW DTC P1B75 error code should be addressed promptly to prevent any potential damage to the drive motor or other related components. Ignoring this issue may lead to further complications and could affect the vehicle’s performance and efficiency.

How to diagnose DTC P1B75 on BMW

To diagnose the DTC P1B75 error code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the drive motor temperature sensor ‘B’ and its wiring for any visible damage or corrosion
3. Test the sensor’s resistance and voltage output to ensure it is functioning correctly
4. Check for any loose connections or poor grounds in the sensor circuit

How to fix DTC P1B75 on BMW

To fix the DTC P1B75 error code on a BMW, the following steps may be taken:

1. Replace the faulty drive motor temperature sensor ‘B’ with a new, OEM part
2. Repair any damaged wiring or connections in the sensor circuit
3. Clear the fault codes using a diagnostic scanner after the repairs have been completed
4. Perform a test drive to ensure the issue has been resolved and the error code does not return

How to erase DTC P1B75 on BMW

To erase the DTC P1B75 error code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Access the scanner’s menu and select the option to clear fault codes
3. Confirm the action and wait for the scanner to erase the stored codes
4. Disconnect the scanner and start the vehicle to ensure the error code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.