BMW DTC P1CE5 – DC/DC Converter Temperature Sensor ‘B’ Temperature Out of Range High
DTC P1CE5 meaning on BMW
The DTC P1CE5 code on a BMW indicates that the DC/DC Converter Temperature Sensor ‘B’ is reporting a temperature that is out of the acceptable high range. The DC/DC converter is responsible for converting high voltage direct current (HVDC) from the high-voltage battery into the low voltage direct current (LVDC) needed to power various systems in the vehicle.
BMW DTC P1CE5 symptoms
Symptoms of the DTC P1CE5 code on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Reduced power or performance
- Possible overheating of the DC/DC converter
BMW DTC P1CE5 causes
The potential causes of the DTC P1CE5 code on a BMW include:
- Failed DC/DC Converter Temperature Sensor ‘B’
- Wiring or connection issues related to the sensor
- Faulty DC/DC converter
BMW DTC P1CE5 seriousness
The DTC P1CE5 code should be addressed promptly as it can lead to reduced efficiency and potential damage to the DC/DC converter if left unresolved. Ignoring this issue may result in further electrical system problems in the vehicle.
How to diagnose DTC P1CE5 on BMW
To diagnose the DTC P1CE5 code on a BMW, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
- Inspect the DC/DC Converter Temperature Sensor ‘B’ and its wiring for any visible damage or corrosion
- Test the sensor’s resistance and voltage output to determine if it is functioning correctly
- Check the DC/DC converter for any signs of overheating or malfunction
How to fix DTC P1CE5 on BMW
To fix the DTC P1CE5 code on a BMW, the following steps may be taken:
- Replace the DC/DC Converter Temperature Sensor ‘B’ if it is found to be faulty
- Repair any damaged wiring or connections related to the sensor
- If the DC/DC converter is faulty, it may need to be replaced
- Clear the fault codes using a diagnostic scanner after the repairs have been completed
How to erase DTC P1CE5 on BMW
To erase the DTC P1CE5 code on a BMW, follow these steps:
- Use a diagnostic scanner to access the vehicle’s onboard computer system
- Select the option to clear the fault codes stored in the system
- Confirm the action and wait for the scanner to complete the process
- Verify that the DTC P1CE5 code has been successfully erased by checking for any remaining fault codes
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.