P1CE9 – BMW DTC

BMW DTC P1CE9 – DC/DC Converter Temperature Sensor ‘C’ Circuit Temperature Out of Range High

DTC P1CE9 meaning on BMW

The DTC P1CE9 code on a BMW indicates an issue with the DC/DC converter temperature sensor ‘C’ circuit temperature being out of range high. This means that the sensor responsible for monitoring the temperature of the DC/DC converter has detected a temperature reading that is higher than the specified range.

BMW DTC P1CE9 symptoms

Symptoms of the DTC P1CE9 code on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced fuel efficiency
• Engine running hotter than normal
• Potential drivability issues

BMW DTC P1CE9 causes

The common causes of the DTC P1CE9 code on a BMW include:

• Faulty DC/DC converter temperature sensor ‘C’
• Wiring or connection issues in the temperature sensor circuit
• High ambient temperatures affecting sensor readings

BMW DTC P1CE9 seriousness

The DTC P1CE9 code should not be ignored as it can lead to potential overheating issues in the vehicle. Driving with a malfunctioning temperature sensor can cause damage to the DC/DC converter and other components, leading to costly repairs.

How to diagnose DTC P1CE9 on BMW

To diagnose the DTC P1CE9 code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the DC/DC converter temperature sensor ‘C’ and its wiring for any visible damage or corrosion
3. Test the sensor’s resistance and voltage readings to determine if it is functioning correctly
4. Check for any loose connections or shorts in the sensor circuit

How to fix DTC P1CE9 on BMW

To fix the DTC P1CE9 code on a BMW, the following steps may be taken:

1. Replace the faulty DC/DC converter temperature sensor ‘C’ with a new one
2. Repair any damaged wiring or connections in the sensor circuit
3. Clear the fault codes using a diagnostic scanner after the repairs have been completed
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P1CE9 on BMW

To erase the DTC P1CE9 code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Access the scanner’s menu to clear the fault codes stored in the vehicle’s computer
3. Follow the on-screen prompts to erase the DTC P1CE9 code
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.