P1D68 – BMW DTC

BMW DTC P1D68 – A/C Coolant Heater Control Module Temperature Sensor Circuit High

DTC P1D68 meaning on BMW

DTC P1D68 on a BMW indicates a fault with the A/C Coolant Heater Control Module Temperature Sensor Circuit. This fault code is triggered when the control module detects a high voltage signal from the temperature sensor circuit, suggesting a potential issue with the sensor or its wiring.

BMW DTC P1D68 symptoms

Symptoms of DTC P1D68 on a BMW may include:

• Malfunctioning or erratic operation of the A/C system
• Reduced heating or cooling performance
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P1D68 causes

Common causes of DTC P1D68 on a BMW include:

• Faulty A/C Coolant Heater Control Module Temperature Sensor
• Wiring issues such as shorts or open circuits in the sensor circuit
• Corrosion or poor connections in the sensor circuit

BMW DTC P1D68 seriousness

While DTC P1D68 may not directly affect the drivability of the vehicle, it can impact the comfort and functionality of the A/C system. Ignoring this fault code may lead to further issues with the climate control system.

How to diagnose DTC P1D68 on BMW

To diagnose DTC P1D68 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the A/C Coolant Heater Control Module Temperature Sensor and its wiring for any visible damage or corrosion
3. Perform a continuity test on the sensor circuit to check for any open or short circuits
4. Check the sensor’s resistance values to ensure it is within specifications

How to fix DTC P1D68 on BMW

To fix DTC P1D68 on a BMW, you can try the following:

1. Replace the faulty A/C Coolant Heater Control Module Temperature Sensor
2. Repair any damaged or corroded wiring in the sensor circuit
3. Ensure all connections are secure and free of corrosion
4. Clear the fault code and perform a test drive to verify the repair

How to erase DTC P1D68 on BMW

To erase DTC P1D68 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s memory. After performing the necessary repairs, clearing the code will reset the Check Engine Light and allow you to monitor the system for any recurring issues.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.