BMW DTC P1D69 – A/C Coolant Heater Control Module Temperature Sensor Temperature Out of Range High
DTC P1D69 meaning on BMW
The DTC P1D69 error code on BMW vehicles indicates that the A/C Coolant Heater Control Module Temperature Sensor Temperature is out of range high. This means that the sensor responsible for monitoring the temperature of the A/C coolant heater control module is reporting a temperature that is higher than the expected range.
BMW DTC P1D69 symptoms
Symptoms of the BMW DTC P1D69 error code may include:
- Malfunctioning air conditioning system
- Erratic temperature readings on the climate control
- Check Engine Light (CEL) illuminated on the dashboard
BMW DTC P1D69 causes
Possible causes of the BMW DTC P1D69 error code include:
- Faulty A/C Coolant Heater Control Module Temperature Sensor
- Wiring or connection issues related to the sensor
- Software or calibration issues within the control module
BMW DTC P1D69 seriousness
The seriousness of the BMW DTC P1D69 error code lies in the potential impact on the proper functioning of the air conditioning system. Ignoring this issue may lead to discomfort while driving, especially in extreme weather conditions. Additionally, prolonged operation with a faulty sensor can potentially cause damage to other components.
How to diagnose DTC P1D69 on BMW
To diagnose the DTC P1D69 error code on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the specific fault code
- Inspect the A/C Coolant Heater Control Module Temperature Sensor and its wiring for any visible damage
- Test the sensor’s resistance and voltage output to determine if it is functioning correctly
- Check for any software updates or recalibrations that may be required
How to fix DTC P1D69 on BMW
To fix the DTC P1D69 error code on a BMW, the following steps may be taken:
- Replace the faulty A/C Coolant Heater Control Module Temperature Sensor
- Repair any damaged wiring or connections related to the sensor
- Perform any necessary software updates or recalibrations on the control module
- Clear the fault code and reset the system to see if the issue has been resolved
How to erase DTC P1D69 on BMW
To erase the DTC P1D69 error code on a BMW, the fault code can be cleared using a diagnostic scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is important to address the root cause of the issue first to prevent the code from reappearing.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.