P1E40 – BMW DTC

BMW DTC P1E40 – Drive Motor ‘B’ Control Module EEPROM Error

DTC P1E40 meaning on BMW

The DTC P1E40 error code on BMW vehicles indicates a Drive Motor ‘B’ Control Module EEPROM Error. This error is related to the control module responsible for managing the drive motor ‘B’ functions within the vehicle’s hybrid or electric powertrain system.

BMW DTC P1E40 symptoms

Symptoms of the DTC P1E40 error on a BMW may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced power or performance
• Issues with the hybrid or electric drive system
• Vehicle may go into a reduced power or limp mode

BMW DTC P1E40 causes

The DTC P1E40 error code on BMW vehicles can be caused by various factors, including:

• Corrupted or faulty data in the Drive Motor ‘B’ Control Module EEPROM
• Electrical issues within the control module or related wiring
• Software glitches or malfunctions
• Component failure within the drive motor ‘B’ system

BMW DTC P1E40 seriousness

The DTC P1E40 error code should be addressed promptly as it can affect the performance and drivability of the vehicle. Ignoring this error may lead to further damage to the hybrid or electric powertrain components.

How to diagnose DTC P1E40 on BMW

To diagnose the DTC P1E40 error on a BMW, a comprehensive diagnostic scan tool capable of reading manufacturer-specific codes is required. The following steps can be taken:

1. Retrieve the error code using a diagnostic scanner
2. Inspect the drive motor ‘B’ control module and related wiring for any visible damage
3. Perform a thorough inspection of the drive motor ‘B’ system components
4. Check for any software updates or recalibrations available from BMW

How to fix DTC P1E40 on BMW

Fixing the DTC P1E40 error on a BMW may involve the following steps:

1. Clear the error code using a diagnostic scanner and monitor for recurrence
2. Repair or replace any damaged wiring or components in the drive motor ‘B’ system
3. Update the control module software to the latest version
4. Perform a system reset or calibration as per manufacturer guidelines

How to erase DTC P1E40 on BMW

To erase the DTC P1E40 error code on a BMW, follow these steps:

1. Use a diagnostic scanner to clear the error code from the vehicle’s memory
2. Ensure that the underlying issue causing the error has been addressed
3. Perform a test drive to confirm that the error code does not reappear

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.