BMW DTC P2011 – Intake Manifold Runner Control Circuit/Open (Bank 2)
DTC P2011 meaning on BMW
The Diagnostic Trouble Code (DTC) P2011 for BMW indicates an issue with the Intake Manifold Runner Control Circuit on Bank 2. This means that there is an open circuit detected in the control system responsible for adjusting the intake manifold runner position.
BMW DTC P2011 symptoms
Symptoms of DTC P2011 on a BMW may include:
- Check Engine Light illuminated on the dashboard
- Reduced engine performance or power
- Engine stalling or rough idling
- Decreased fuel efficiency
BMW DTC P2011 causes
Common causes of DTC P2011 on a BMW include:
- Faulty Intake Manifold Runner Control Valve
- Wiring or connector issues in the control circuit
- Intake Manifold Runner Control Module failure
- Vacuum leaks in the intake system
BMW DTC P2011 seriousness
While DTC P2011 may not always result in immediate drivability issues, it is important to address this code promptly to prevent potential engine performance problems and further damage to the vehicle.
How to diagnose DTC P2011 on BMW
To diagnose DTC P2011 on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes and confirm P2011.
- Inspect the intake manifold runner control valve and associated wiring for any visible damage or corrosion.
- Check for vacuum leaks in the intake system using a smoke machine or other suitable methods.
- Test the intake manifold runner control module for proper functionality.
How to fix DTC P2011 on BMW
To fix DTC P2011 on a BMW, you can consider the following actions:
- Replace the faulty Intake Manifold Runner Control Valve.
- Repair or replace any damaged wiring or connectors in the control circuit.
- Address any vacuum leaks in the intake system by replacing gaskets or hoses.
- If necessary, replace the Intake Manifold Runner Control Module.
How to erase DTC P2011 on BMW
To erase DTC P2011 on a BMW, you can clear the fault codes using a diagnostic scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is recommended to address the underlying issue causing the code before clearing it to prevent it from reoccurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.