P2034 – BMW DTC

BMW DTC P2034 – Exhaust Gas Temperature Sensor Circuit (Bank 2 Sensor 2)

DTC P2034 meaning on BMW

DTC P2034 indicates a fault in the Exhaust Gas Temperature (EGT) Sensor Circuit for Bank 2 Sensor 2 in a BMW vehicle. This sensor is responsible for monitoring the exhaust gas temperature after the catalytic converter in the second bank of cylinders.

BMW DTC P2034 symptoms

Symptoms of DTC P2034 in a BMW may include:

• Illuminated Check Engine Light
• Reduced engine performance
• Increased fuel consumption
• Possible rough idling or misfiring

BMW DTC P2034 causes

Common causes of DTC P2034 in a BMW include:

• Defective EGT sensor
• Wiring or connector issues in the EGT sensor circuit
• Exhaust leaks near the sensor
• Software or calibration issues

BMW DTC P2034 seriousness

While DTC P2034 may not cause immediate drivability issues, it is important to address this fault promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.

How to diagnose DTC P2034 on BMW

To diagnose DTC P2034 on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code
2. Inspect the EGT sensor and its wiring for damage or corrosion
3. Check for exhaust leaks near the sensor
4. Perform a resistance test on the sensor
5. Verify proper sensor operation using a scan tool

How to fix DTC P2034 on BMW

To fix DTC P2034 on a BMW, the following steps may be taken:

1. Replace the faulty EGT sensor
2. Repair or replace damaged wiring or connectors
3. Address any exhaust leaks near the sensor
4. Update software or perform calibration if necessary

How to erase DTC P2034 on BMW

After fixing the underlying issue causing DTC P2034 on a BMW, the fault code can be erased using a diagnostic scanner. This will reset the Check Engine Light and clear the code from the vehicle’s memory.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.