P2072 – BMW DTC

BMW DTC P2072 – Throttle Actuator Control System – Ice Blockage Bank 1

DTC P2072 meaning on BMW

DTC P2072 on a BMW indicates an issue with the Throttle Actuator Control System, specifically related to ice blockage in Bank 1. This fault code is triggered when the Engine Control Module (ECM) detects that the throttle actuator is not functioning properly due to ice blockage in the intake system.

BMW DTC P2072 symptoms

Symptoms of DTC P2072 on a BMW may include:

• Reduced engine power
• Engine stalling or hesitation
• Check Engine Light (CEL) illuminated on the dashboard
• Poor acceleration

BMW DTC P2072 causes

The common causes of DTC P2072 on a BMW are:

• Ice blockage in the intake system
• Faulty throttle actuator
• Wiring or connector issues in the throttle actuator circuit

BMW DTC P2072 seriousness

DTC P2072 should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this fault code may result in further damage to the engine or drivetrain components.

How to diagnose DTC P2072 on BMW

To diagnose DTC P2072 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the throttle actuator and intake system for any signs of ice blockage or physical damage.
3. Check the wiring and connectors in the throttle actuator circuit for any loose connections or corrosion.
4. Perform a throttle actuator test using a diagnostic tool to check its functionality.

How to fix DTC P2072 on BMW

To fix DTC P2072 on a BMW, you can try the following:

1. Thaw any ice blockage in the intake system by warming up the engine.
2. Clean or replace the throttle actuator if it is faulty.
3. Repair any damaged wiring or connectors in the throttle actuator circuit.
4. Clear the fault codes using a diagnostic scanner after the repairs are completed.

How to erase DTC P2072 on BMW

To erase DTC P2072 on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Access the ECM and navigate to the fault code menu.
3. Select the option to clear the fault codes stored in the ECM.
4. Confirm the action and wait for the scanner to erase the DTC P2072 code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.