P2080 – BMW DTC

BMW DTC P2080 – Exhaust Gas Temperature Sensor Circuit Range/Performance (Bank 1 Sensor 1)

DTC P2080 meaning on BMW

The Diagnostic Trouble Code (DTC) P2080 for BMW refers to the Exhaust Gas Temperature Sensor Circuit Range/Performance issue on Bank 1 Sensor 1. This code indicates that there is a problem with the exhaust gas temperature sensor circuit, specifically on the first bank of the engine.

BMW DTC P2080 symptoms

Symptoms of the BMW DTC P2080 may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Engine running rough or misfiring

BMW DTC P2080 causes

Common causes of the BMW DTC P2080 include:

• Defective exhaust gas temperature sensor
• Wiring or connector issues in the sensor circuit
• Exhaust system leaks or damage
• Software or calibration issues

BMW DTC P2080 seriousness

The seriousness of the BMW DTC P2080 code lies in the potential impact on engine performance and emissions. Ignoring this code can lead to reduced fuel efficiency, increased emissions, and potential damage to the engine components over time.

How to diagnose DTC P2080 on BMW

To diagnose the DTC P2080 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes
2. Inspect the exhaust gas temperature sensor and its wiring for any visible damage
3. Check for exhaust leaks or other issues in the exhaust system
4. Perform a sensor resistance test to determine if it is functioning correctly

How to fix DTC P2080 on BMW

To fix the DTC P2080 on a BMW, you may need to:

1. Replace the faulty exhaust gas temperature sensor
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Address any exhaust system leaks or damage
4. Update the engine control module software if necessary

How to erase DTC P2080 on BMW

To erase the DTC P2080 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes
2. After fixing the underlying issue, drive the vehicle to allow the system to retest and verify the repair
3. If the issue is resolved, the Check Engine Light should turn off automatically

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.