P2082 – BMW DTC

BMW DTC P2082 – Exhaust Gas Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 1)

DTC P2082 meaning on BMW

DTC P2082 indicates a malfunction in the Exhaust Gas Temperature (EGT) sensor circuit for Bank 2 Sensor 1 in a BMW vehicle. This fault code is triggered when the Engine Control Module (ECM) detects that the signal from the EGT sensor is outside the expected range or performance parameters.

BMW DTC P2082 symptoms

Symptoms of DTC P2082 in a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Possible rough idling or misfiring

BMW DTC P2082 causes

Common causes of DTC P2082 on a BMW can include:

• Defective Exhaust Gas Temperature (EGT) sensor
• Wiring or connector issues in the EGT sensor circuit
• ECM software or hardware problems

BMW DTC P2082 seriousness

While DTC P2082 may not always result in immediate drivability issues, it is important to address this fault code promptly. Ignoring the problem can lead to potential engine damage or decreased fuel efficiency over time.

How to diagnose DTC P2082 on BMW

To diagnose DTC P2082 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors related to the Bank 2 Sensor 1 EGT sensor
3. Test the EGT sensor for proper resistance and voltage readings
4. Check for any exhaust leaks or other related issues

How to fix DTC P2082 on BMW

To fix DTC P2082 on a BMW, you may need to:

1. Replace the faulty Bank 2 Sensor 1 EGT sensor
2. Repair any damaged wiring or connectors in the EGT sensor circuit
3. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P2082 on BMW

To erase DTC P2082 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault code from the ECM memory
2. Perform a battery reset by disconnecting the negative terminal for a few minutes
3. Ensure the issue has been resolved before clearing the code to prevent it from reoccurring

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.