BMW DTC P2116 – Throttle/Pedal Position Sensor ‘E’ Minimum Stop Performance
DTC P2116 meaning on BMW
The Diagnostic Trouble Code (DTC) P2116 for BMW indicates an issue with the Throttle/Pedal Position Sensor ‘E’ Minimum Stop Performance. This means that the Engine Control Module (ECM) has detected that the signal from the throttle or pedal position sensor ‘E’ has fallen below the minimum allowable threshold.
BMW DTC P2116 symptoms
Symptoms of DTC P2116 on a BMW may include:
- Reduced engine power
- Engine stalling or hesitation
- Difficulty accelerating
- Illuminated Check Engine Light
BMW DTC P2116 causes
Common causes of DTC P2116 on a BMW include:
- Faulty throttle or pedal position sensor ‘E’
- Wiring or connector issues in the sensor circuit
- ECM software or hardware problems
BMW DTC P2116 seriousness
DTC P2116 should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this code may result in further damage to engine components or unsafe driving conditions.
How to diagnose DTC P2116 on BMW
To diagnose DTC P2116 on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes and freeze frame data
- Inspect the throttle and pedal position sensor ‘E’ for any visible damage or wear
- Check the wiring and connectors for any signs of corrosion or disconnection
- Perform a sensor calibration or relearn procedure if necessary
How to fix DTC P2116 on BMW
To fix DTC P2116 on a BMW, you can try the following solutions:
- Replace the faulty throttle or pedal position sensor ‘E’
- Repair any damaged wiring or connectors in the sensor circuit
- Update the ECM software if needed
- Perform a throttle relearn procedure to recalibrate the sensor
How to erase DTC P2116 on BMW
To erase DTC P2116 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM memory. After addressing the underlying issue and fixing the problem, you can then reset the codes to turn off the Check Engine Light.