P211E – BMW DTC

BMW DTC P211E – Throttle Actuator ‘B’ Control Module Processor

DTC P211E meaning on BMW

The DTC P211E fault code on a BMW indicates an issue with the Throttle Actuator ‘B’ Control Module Processor. This fault code is specific to the electronic throttle control system and typically points to a problem with the control module’s processing capabilities.

BMW DTC P211E symptoms

Symptoms of a DTC P211E on a BMW may include:

• Reduced engine power
• Engine stalling or hesitation
• Throttle response issues
• Illuminated Check Engine Light

BMW DTC P211E causes

Common causes of a DTC P211E on a BMW include:

• Faulty throttle actuator control module
• Wiring or connector issues in the throttle actuator circuit
• Software or programming issues

BMW DTC P211E seriousness

The DTC P211E fault code should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this fault code may result in further damage to the throttle control system and could potentially leave the vehicle inoperable.

How to diagnose DTC P211E on BMW

To diagnose a DTC P211E on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the throttle actuator control module and related wiring for any visible damage
3. Perform a thorough inspection of the throttle control system components
4. Test the throttle actuator control module for proper functionality

How to fix DTC P211E on BMW

Fixing a DTC P211E on a BMW may involve the following steps:

1. Replace the faulty throttle actuator control module if necessary
2. Repair any damaged wiring or connectors in the throttle actuator circuit
3. Update the software or programming of the control module if required
4. Perform a throttle body adaptation procedure

How to erase DTC P211E on BMW

To erase a DTC P211E on a BMW, a mechanic can use a diagnostic scanner to clear the fault code from the vehicle’s memory. After addressing the underlying issue that caused the fault code, the mechanic can then reset the Check Engine Light and verify that the fault code does not return.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.