BMW DTC P2129 – Throttle/Pedal Position Sensor/Switch ‘E’ Circuit Intermittent
DTC P2129 meaning on BMW
The Diagnostic Trouble Code (DTC) P2129 for BMW refers to an issue with the Throttle/Pedal Position Sensor/Switch ‘E’ Circuit Intermittent. This code indicates that there is a problem with the electrical circuit associated with the throttle or pedal position sensor/switch ‘E’ in the vehicle.
BMW DTC P2129 symptoms
Symptoms of the DTC P2129 on a BMW may include:
- Reduced engine power
- Acceleration issues
- Unresponsive throttle
- Illuminated Check Engine Light
BMW DTC P2129 causes
Common causes of the DTC P2129 on a BMW include:
- Faulty throttle or pedal position sensor/switch ‘E’
- Wiring or connector issues in the sensor circuit
- Corrosion or poor connections in the sensor circuit
- Electronic control module (ECM) problems
BMW DTC P2129 seriousness
The DTC P2129 should be addressed promptly as it can lead to drivability issues and potentially unsafe driving conditions. Ignoring this code may result in further damage to the vehicle and compromise its performance.
How to diagnose DTC P2129 on BMW
To diagnose the DTC P2129 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s ECM.
- Inspect the throttle and pedal position sensor/switch ‘E’ for any visible damage or wear.
- Check the wiring and connectors associated with the sensor circuit for any signs of corrosion or disconnection.
- Perform a thorough inspection of the ECM and related components for any faults.
How to fix DTC P2129 on BMW
To fix the DTC P2129 on a BMW, you can try the following solutions:
- Replace the faulty throttle or pedal position sensor/switch ‘E’.
- Repair or replace any damaged wiring or connectors in the sensor circuit.
- Clean or repair any corrosion or poor connections in the sensor circuit.
- If necessary, replace the ECM or address any ECM-related issues.
How to erase DTC P2129 on BMW
To erase the DTC P2129 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing and fixing the underlying issue causing the code, you can reset the ECM to remove the DTC P2129 from the system.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.