BMW DTC P2175 – Throttle Actuator Control System – Low Air Flow Detected
DTC P2175 meaning on BMW
DTC P2175 on a BMW indicates an issue with the Throttle Actuator Control System, specifically a low air flow detected. This means that the engine control module (ECM) has detected that the amount of air entering the engine is lower than expected based on the throttle position.
BMW DTC P2175 symptoms
Symptoms of DTC P2175 on a BMW may include:
- Reduced engine power
- Engine stalling or hesitation
- Check Engine Light (CEL) illuminated
- Poor acceleration
BMW DTC P2175 causes
The possible causes of DTC P2175 on a BMW include:
- Dirty or clogged air filter
- Faulty throttle actuator
- Vacuum leaks in the intake system
- Issues with the mass airflow sensor (MAF)
BMW DTC P2175 seriousness
DTC P2175 should be addressed promptly as it can lead to drivability issues and potential engine damage if left unresolved. Ignoring this fault may result in poor engine performance and reduced fuel efficiency.
How to diagnose DTC P2175 on BMW
To diagnose DTC P2175 on a BMW, a mechanic may perform the following steps:
- Scan the vehicle’s ECM for fault codes
- Inspect the air filter for dirt or clogs
- Check for vacuum leaks in the intake system
- Test the throttle actuator for proper operation
- Inspect the mass airflow sensor (MAF) for any issues
How to fix DTC P2175 on BMW
To fix DTC P2175 on a BMW, the following steps may be taken:
- Replace the air filter if dirty or clogged
- Repair any vacuum leaks in the intake system
- Replace the throttle actuator if faulty
- Clean or replace the mass airflow sensor (MAF)
- Clear the fault code and reset the ECM
How to erase DTC P2175 on BMW
To erase DTC P2175 on a BMW, the fault code can be cleared using a diagnostic scanner or by disconnecting the vehicle’s battery for a few minutes. After the repair has been made, the ECM should be reset to clear the fault code and turn off the Check Engine Light.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.