BMW DTC P2193 – Fuel Control System ‘A’ Too Lean at Higher Load (Bank 2)
DTC P2193 meaning on BMW
The Diagnostic Trouble Code (DTC) P2193 for BMW indicates that the Fuel Control System ‘A’ is too lean at higher load on Bank 2. This means that the engine control module (ECM) has detected a lean air-fuel mixture in the fuel control system on the specified bank of the engine during high load conditions.
BMW DTC P2193 symptoms
Symptoms of DTC P2193 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Decreased engine performance
- Engine misfires or hesitation
- Increased fuel consumption
- Rough idling or stalling
BMW DTC P2193 causes
Possible causes of DTC P2193 on a BMW include:
- Vacuum leaks in the intake system
- Faulty oxygen sensor (Bank 2 Sensor 1)
- Dirty or clogged fuel injectors
- Fuel pressure regulator issues
- Mass air flow sensor (MAF) malfunction
BMW DTC P2193 seriousness
Ignoring DTC P2193 on a BMW can lead to potential engine damage and decreased fuel efficiency. It is important to address this issue promptly to prevent further complications.
How to diagnose DTC P2193 on BMW
To diagnose DTC P2193 on a BMW, you can perform the following steps:
- Use an OBD-II scanner to retrieve the fault codes and freeze frame data
- Inspect the intake system for any vacuum leaks
- Check the oxygen sensor (Bank 2 Sensor 1) for proper operation
- Clean or replace fuel injectors if necessary
- Test the fuel pressure regulator and MAF sensor
How to fix DTC P2193 on BMW
To fix DTC P2193 on a BMW, you can try the following solutions:
- Repair any vacuum leaks in the intake system
- Replace the faulty oxygen sensor (Bank 2 Sensor 1)
- Clean or replace clogged fuel injectors
- Address any fuel pressure regulator issues
- Clean or replace the mass air flow sensor (MAF)
How to erase DTC P2193 on BMW
To erase DTC P2193 on a BMW, you can use an OBD-II scanner to clear the fault codes. After addressing the underlying issue causing the DTC, clearing the codes will reset the Check Engine Light and monitor the system for any recurring problems.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.