P222C – BMW DTC

BMW DTC P222C – Barometric Pressure Sensor ‘B’ Circuit Low

DTC P222C meaning on BMW

The DTC P222C for BMW refers to a fault with the Barometric Pressure Sensor ‘B’ circuit registering a low voltage. This sensor is responsible for measuring the atmospheric pressure outside the vehicle, which is crucial for the engine control module to adjust fuel delivery and ignition timing accurately.

BMW DTC P222C symptoms

Symptoms of a DTC P222C on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Rough idling or stalling

BMW DTC P222C causes

Common causes of a DTC P222C on a BMW include:

• Defective Barometric Pressure Sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Interference from other electrical components

BMW DTC P222C seriousness

While a DTC P222C may not cause immediate drivability issues, it can lead to poor engine performance and increased fuel consumption if left unresolved. It is recommended to address this fault promptly to prevent further complications.

How to diagnose DTC P222C on BMW

To diagnose a DTC P222C on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the Barometric Pressure Sensor ‘B’ and its wiring for any visible damage
3. Check the sensor’s voltage output using a multimeter
4. Verify the sensor’s readings against specifications provided by the manufacturer

How to fix DTC P222C on BMW

To fix a DTC P222C on a BMW, the following steps are typically taken:

1. Replace the Barometric Pressure Sensor ‘B’ if it is found to be faulty
2. Repair any damaged wiring or connectors in the sensor circuit
3. Clear the fault code using a diagnostic scanner after the repair
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P222C on BMW

To erase a DTC P222C on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Select the option to clear fault codes from the scanner menu
3. Confirm the action and wait for the scanner to erase the DTC P222C code
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully cleared

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.