P222D – BMW DTC

BMW DTC P222D – Barometric Pressure Sensor ‘B’ Circuit High

DTC P222D meaning on BMW

The DTC P222D error code on a BMW indicates an issue with the Barometric Pressure Sensor ‘B’ circuit registering a high voltage signal. This sensor is responsible for measuring the atmospheric pressure outside the vehicle, which is crucial for the engine control module to adjust fuel delivery and ignition timing accurately.

BMW DTC P222D symptoms

Symptoms of the DTC P222D code on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance
• Decreased fuel efficiency
• Engine stalling or rough idling

BMW DTC P222D causes

Common causes of the DTC P222D code on a BMW include:

• Malfunctioning Barometric Pressure Sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Corrosion or damage to sensor components

BMW DTC P222D seriousness

While the DTC P222D code may not cause immediate drivability issues, it is essential to address it promptly. Ignoring this code can lead to poor engine performance, reduced fuel efficiency, and potential long-term damage to the engine components.

How to diagnose DTC P222D on BMW

To diagnose the DTC P222D code on a BMW, follow these steps:

1. Use an OBD-II scanner to retrieve the specific fault code.
2. Inspect the Barometric Pressure Sensor ‘B’ and its wiring for any visible damage or corrosion.
3. Check the sensor’s voltage output using a multimeter to verify if it is within the specified range.
4. Perform a smoke test to check for any vacuum leaks that could affect the sensor’s readings.

How to fix DTC P222D on BMW

To fix the DTC P222D code on a BMW, consider the following steps:

1. Replace the Barometric Pressure Sensor ‘B’ if it is found to be faulty.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Clean or replace any corroded sensor components.
4. Clear the fault code using an OBD-II scanner after completing the repairs.

How to erase DTC P222D on BMW

To erase the DTC P222D code on a BMW, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Select the option to clear the fault codes stored in the engine control module.
3. Follow the on-screen prompts to confirm the deletion of the DTC P222D code.
4. Once the code is successfully cleared, start the vehicle to ensure the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.