P222E – BMW DTC

BMW DTC P222E – Barometric Pressure Sensor ‘B’ Circuit Intermittent/Erratic

DTC P222E meaning on BMW

The DTC P222E error code on a BMW indicates an intermittent or erratic signal from the Barometric Pressure Sensor ‘B’ circuit. This sensor is responsible for measuring the atmospheric pressure outside the vehicle, which is crucial for the engine’s air-fuel ratio calculations.

BMW DTC P222E symptoms

Symptoms of the DTC P222E on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance
• Engine stalling or rough idling
• Poor fuel efficiency

BMW DTC P222E causes

The potential causes of the DTC P222E on a BMW include:

• Faulty Barometric Pressure Sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Interference from other electronic components

BMW DTC P222E seriousness

While the DTC P222E code may not cause immediate harm to the vehicle, it can lead to poor engine performance and reduced fuel efficiency. Ignoring this issue may result in further damage to the engine over time.

How to diagnose DTC P222E on BMW

To diagnose the DTC P222E on a BMW, you can follow these steps:

1. Use an OBD-II scanner to retrieve the error code and freeze frame data
2. Inspect the Barometric Pressure Sensor ‘B’ and its wiring for any visible damage
3. Check the sensor’s voltage and resistance values using a multimeter
4. Perform a smoke test to check for any vacuum leaks in the intake system

How to fix DTC P222E on BMW

To fix the DTC P222E on a BMW, you can try the following solutions:

1. Replace the Barometric Pressure Sensor ‘B’ if it is found to be faulty
2. Repair any damaged wiring or connectors in the sensor circuit
3. Clear any debris or obstructions around the sensor
4. Reset the engine control module (ECM) to see if the code reappears

How to erase DTC P222E on BMW

To erase the DTC P222E code on a BMW, you can:

1. Use an OBD-II scanner to clear the code and reset the Check Engine Light
2. Ensure that the underlying issue causing the code has been resolved before clearing it
3. Perform a test drive to verify that the code does not return

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.