P227C – BMW DTC

BMW DTC P227C – Barometric Pressure Sensor ‘C’ Circuit Low

DTC P227C meaning on BMW

The DTC P227C for BMW refers to a fault with the Barometric Pressure Sensor ‘C’ circuit registering a low voltage condition. This sensor is responsible for measuring the atmospheric pressure, which is crucial for the engine control module to calculate air density and adjust fuel delivery accordingly.

BMW DTC P227C symptoms

Symptoms of a DTC P227C on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Rough idling or stalling

BMW DTC P227C causes

Common causes of a DTC P227C on a BMW include:

• Malfunctioning Barometric Pressure Sensor ‘C’
• Wiring or connector issues in the sensor circuit
• Faulty engine control module (ECM)

BMW DTC P227C seriousness

While a DTC P227C may not cause immediate drivability issues, it is important to address this fault promptly to prevent potential engine performance problems and increased fuel consumption. Ignoring this fault could lead to further damage to engine components over time.

How to diagnose DTC P227C on BMW

To diagnose a DTC P227C on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the Barometric Pressure Sensor ‘C’ and its wiring for any visible damage or corrosion
3. Test the sensor’s voltage output using a multimeter
4. Check for any loose connections or poor grounds in the sensor circuit

How to fix DTC P227C on BMW

To fix a DTC P227C on a BMW, the following steps may be taken:

1. Replace the Barometric Pressure Sensor ‘C’ if it is found to be faulty
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. If necessary, reprogram or replace the engine control module (ECM)

How to erase DTC P227C on BMW

To erase a DTC P227C on a BMW, the fault code can be cleared using a diagnostic scanner. After the repair or replacement of the faulty components, the code can be reset to turn off the Check Engine Light and ensure that the issue has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.