P227E – BMW DTC

BMW DTC P227E – Barometric Pressure Sensor ‘C’ Circuit Intermittent/Erratic

DTC P227E meaning on BMW

DTC P227E on a BMW indicates an intermittent or erratic signal from the Barometric Pressure Sensor ‘C’ circuit. The Engine Control Module (ECM) monitors the barometric pressure sensor to ensure accurate readings for engine performance and emissions control.

BMW DTC P227E symptoms

Symptoms of DTC P227E on a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Poor fuel efficiency
• Rough idling or stalling

BMW DTC P227E causes

Common causes of DTC P227E on a BMW include:

• Faulty barometric pressure sensor
• Wiring or connector issues in the sensor circuit
• Intermittent electrical connection problems

BMW DTC P227E seriousness

While DTC P227E may not cause immediate drivability issues, it can affect engine performance and emissions. Ignoring this fault code may lead to further damage to engine components over time.

How to diagnose DTC P227E on BMW

To diagnose DTC P227E on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data.
2. Inspect the barometric pressure sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s voltage and resistance values according to the manufacturer’s specifications.
4. Perform a smoke test to check for any vacuum leaks that could affect barometric pressure readings.

How to fix DTC P227E on BMW

To fix DTC P227E on a BMW, consider the following:

1. Replace the barometric pressure sensor if it is faulty.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Clean or replace the air filter to ensure accurate barometric pressure readings.
4. Clear the fault code and perform a test drive to verify the repair.

How to erase DTC P227E on BMW

To erase DTC P227E on a BMW, use a diagnostic scanner to clear the fault code from the ECM’s memory. After clearing the code, perform a test drive to ensure the issue has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.