BMW DTC P2288 – Injector Control Pressure Too High
DTC P2288 meaning on BMW
The Diagnostic Trouble Code (DTC) P2288 for BMW indicates that the Engine Control Module (ECM) has detected that the fuel injector control pressure is too high. This code is specific to the fuel injection system and typically points to an issue with the fuel pressure regulation within the system.
BMW DTC P2288 symptoms
Symptoms associated with DTC P2288 on a BMW may include:
- Engine misfires
- Decreased fuel efficiency
- Engine stalling
- Reduced engine performance
- Check Engine Light (CEL) illuminated on the dashboard
BMW DTC P2288 causes
The common causes of DTC P2288 on a BMW include:
- Faulty fuel pressure regulator
- Clogged fuel filter
- Issues with the fuel pump
- Leaking fuel injectors
- Wiring or connector problems in the fuel injection system
BMW DTC P2288 seriousness
Ignoring or neglecting DTC P2288 on a BMW can lead to potential engine performance issues, decreased fuel efficiency, and in severe cases, engine damage. It is important to address this code promptly to prevent further complications.
How to diagnose DTC P2288 on BMW
To diagnose DTC P2288 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM
- Inspect the fuel pressure regulator for proper operation
- Check the fuel filter for any clogs or restrictions
- Test the fuel pump for adequate pressure
- Inspect the fuel injectors for leaks or malfunctions
- Check the wiring and connectors in the fuel injection system for any faults
How to fix DTC P2288 on BMW
To fix DTC P2288 on a BMW, the following steps may be taken:
- Replace the faulty fuel pressure regulator
- Clean or replace the clogged fuel filter
- Repair or replace the fuel pump if necessary
- Address any leaking fuel injectors by repairing or replacing them
- Repair any wiring or connector issues in the fuel injection system
How to erase DTC P2288 on BMW
After fixing the underlying issue causing DTC P2288 on a BMW, the fault codes can be cleared using a diagnostic scanner. This will reset the Check Engine Light and erase the DTC from the ECM’s memory. It is important to ensure that the repair has been successful before clearing the fault codes.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.