BMW DTC P2295 – Fuel Pressure Regulator 2 Control Circuit Low
DTC P2295 meaning on BMW
The Diagnostic Trouble Code (DTC) P2295 for BMW indicates a low voltage condition in the control circuit of Fuel Pressure Regulator 2. This fault code is specific to the fuel pressure regulator control circuit and is triggered when the voltage in the circuit falls below the threshold set by the Engine Control Module (ECM).
BMW DTC P2295 symptoms
Symptoms associated with DTC P2295 on a BMW may include:
- Check Engine Light (MIL) illuminated on the dashboard
- Engine running rough or misfiring
- Reduced engine performance
- Difficulty starting the engine
- Decreased fuel efficiency
BMW DTC P2295 causes
The common causes of DTC P2295 on a BMW include:
- Defective fuel pressure regulator
- Wiring or connector issues in the control circuit
- Faulty Engine Control Module (ECM)
- Low fuel pressure
BMW DTC P2295 seriousness
Ignoring DTC P2295 on a BMW can lead to potential engine performance issues and may result in poor fuel economy. It is important to address this fault code promptly to prevent further damage to the vehicle’s fuel system.
How to diagnose DTC P2295 on BMW
To diagnose DTC P2295 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the wiring and connectors in the fuel pressure regulator control circuit
- Check the fuel pressure regulator for proper operation
- Test the voltage in the control circuit to determine if it falls below specifications
How to fix DTC P2295 on BMW
To fix DTC P2295 on a BMW, the following steps may be taken:
- Replace the faulty fuel pressure regulator if it is determined to be the cause
- Repair any damaged wiring or connectors in the control circuit
- If the ECM is faulty, it may need to be replaced or reprogrammed
- Ensure proper fuel pressure is maintained in the system
How to erase DTC P2295 on BMW
After the issue causing DTC P2295 on a BMW has been resolved, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and erase the DTC from the ECM’s memory. It is important to verify that the repair was successful by driving the vehicle and rescanning for any remaining fault codes.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.