P2299 – BMW DTC

BMW DTC P2299 – Brake Pedal Position / Accelerator Pedal Position Incompatible

DTC P2299 meaning on BMW

The Diagnostic Trouble Code (DTC) P2299 on a BMW indicates an issue with the Brake Pedal Position (BPP) and Accelerator Pedal Position (APP) being incompatible. This means that the signals from the brake pedal and accelerator pedal are not aligning properly, causing a discrepancy in the vehicle’s electronic control system.

BMW DTC P2299 symptoms

Symptoms of DTC P2299 on a BMW may include:

• Reduced engine power
• Difficulty accelerating
• Brake pedal feels stiff or unresponsive
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P2299 causes

Common causes of DTC P2299 on a BMW include:

• Faulty brake pedal position sensor
• Malfunctioning accelerator pedal position sensor
• Wiring issues or poor connections between sensors and the Electronic Control Module (ECM)
• Software glitches in the vehicle’s control system

BMW DTC P2299 seriousness

The seriousness of DTC P2299 on a BMW should not be ignored, as it can lead to unsafe driving conditions and potential loss of control over the vehicle. It is recommended to address this issue promptly to ensure the safety and proper functioning of the vehicle.

How to diagnose DTC P2299 on BMW

To diagnose DTC P2299 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s ECM
2. Inspect the brake pedal position sensor and accelerator pedal position sensor for any visible damage or wear
3. Check the wiring and connections between the sensors and the ECM for any faults
4. Perform a sensor calibration and reset if necessary

How to fix DTC P2299 on BMW

To fix DTC P2299 on a BMW, the following steps may be taken:

1. Replace the faulty brake pedal position sensor or accelerator pedal position sensor
2. Repair any damaged wiring or connections between the sensors and the ECM
3. Update the vehicle’s software to address any control system glitches
4. Perform a sensor calibration and reset to ensure proper alignment

How to erase DTC P2299 on BMW

To erase DTC P2299 on a BMW, the fault codes can be cleared using a diagnostic scanner. After addressing the underlying issue causing the fault code, the codes can be cleared to reset the vehicle’s ECM and turn off the Check Engine Light. It is important to ensure that the root cause of the DTC has been resolved before clearing the codes.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.