P22A8 – BMW DTC

BMW DTC P22A8 – NOx Sensor Heater Sense Circuit Low (Bank 1 Sensor 2)

DTC P22A8 meaning on BMW

The DTC P22A8 code on a BMW indicates an issue with the NOx (nitrogen oxide) sensor heater sense circuit for Bank 1 Sensor 2. This means that the control module has detected a low voltage condition in the heater circuit of the NOx sensor located downstream of the catalytic converter on bank 1 of the engine.

BMW DTC P22A8 symptoms

Symptoms of a DTC P22A8 on a BMW may include:

• – Check Engine Light (MIL) illuminated
• – Reduced engine performance
• – Increased emissions
• – Poor fuel efficiency

BMW DTC P22A8 causes

Common causes of a DTC P22A8 on a BMW include:

• – Faulty NOx sensor heater
• – Wiring or connector issues in the sensor circuit
• – Defective control module
• – Exhaust leaks

BMW DTC P22A8 seriousness

Ignoring a DTC P22A8 on a BMW can lead to increased emissions, reduced engine performance, and potential damage to the catalytic converter. It is important to address this issue promptly to ensure proper vehicle operation and compliance with emissions regulations.

How to diagnose DTC P22A8 on BMW

To diagnose a DTC P22A8 on a BMW, a mechanic would typically perform the following steps:

1. – Use a diagnostic scanner to retrieve the fault codes
2. – Inspect the wiring and connectors in the NOx sensor heater circuit
3. – Test the NOx sensor heater for proper operation
4. – Check for exhaust leaks that could affect sensor performance

How to fix DTC P22A8 on BMW

To fix a DTC P22A8 on a BMW, the following steps may be taken:

1. – Replace the faulty NOx sensor heater
2. – Repair any damaged wiring or connectors in the sensor circuit
3. – Address any exhaust leaks in the system
4. – Clear the fault codes and reset the Check Engine Light

How to erase DTC P22A8 on BMW

To erase a DTC P22A8 on a BMW, the fault codes can be cleared using a diagnostic scanner. After the necessary repairs have been made to address the underlying issue, the codes can be reset, and the Check Engine Light should turn off. It is important to ensure that the root cause of the fault has been resolved before clearing the codes.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.