P22B3 – BMW DTC

BMW DTC P22B3 – O2 Sensor Negative Current Control Circuit Low (Bank 1 Sensor 2)

DTC P22B3 meaning on BMW

DTC P22B3 on a BMW indicates an issue with the O2 Sensor Negative Current Control Circuit Low for Bank 1 Sensor 2. This means that the control module has detected a lower than expected voltage signal from the downstream oxygen sensor in the exhaust system.

BMW DTC P22B3 symptoms

Symptoms of DTC P22B3 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Poor fuel economy
• Engine running rough or misfiring
• Increased emissions

BMW DTC P22B3 causes

Common causes of DTC P22B3 on a BMW include:

• Faulty oxygen sensor
• Wiring or connector issues in the O2 sensor circuit
• Exhaust leaks near the sensor
• Engine running rich or lean

BMW DTC P22B3 seriousness

While DTC P22B3 may not cause immediate drivability issues, it can lead to poor engine performance and increased emissions if left unresolved. It is important to address this fault to maintain the efficiency and health of the vehicle.

How to diagnose DTC P22B3 on BMW

To diagnose DTC P22B3 on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors of the Bank 1 Sensor 2 oxygen sensor
3. Check for exhaust leaks near the sensor
4. Test the oxygen sensor using a multimeter

How to fix DTC P22B3 on BMW

To fix DTC P22B3 on a BMW, you can try the following solutions:

1. Replace the Bank 1 Sensor 2 oxygen sensor
2. Repair any damaged wiring or connectors in the sensor circuit
3. Address any exhaust leaks near the sensor
4. Perform a fuel system diagnosis to ensure proper air-fuel mixture

How to erase DTC P22B3 on BMW

To erase DTC P22B3 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s memory. After fixing the underlying issue causing the fault code, you can reset the Check Engine Light and verify that the code does not return during normal driving conditions.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.