P22BB – BMW DTC

BMW DTC P22BB – O2 Sensor Reference Voltage Circuit/Open (Bank 2 Sensor 2)

DTC P22BB meaning on BMW

DTC P22BB on a BMW indicates an issue with the O2 Sensor Reference Voltage Circuit for Bank 2 Sensor 2. This fault code is triggered when the Engine Control Module (ECM) detects an open circuit or a lack of voltage in the O2 sensor’s reference circuit.

BMW DTC P22BB symptoms

Symptoms of DTC P22BB on a BMW may include:

• Check Engine Light (MIL) illuminated
• Poor engine performance
• Reduced fuel efficiency
• Increased emissions

BMW DTC P22BB causes

Common causes of DTC P22BB on a BMW include:

• Faulty O2 sensor
• Open or short circuit in the O2 sensor reference voltage circuit
• Corrosion or poor connections in the wiring harness
• Defective Engine Control Module (ECM)

BMW DTC P22BB seriousness

DTC P22BB should not be ignored as it can lead to poor engine performance, reduced fuel efficiency, and increased emissions. Ignoring this fault code may also cause damage to other components of the vehicle over time.

How to diagnose DTC P22BB on BMW

To diagnose DTC P22BB on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code
2. Inspect the wiring harness for any visible damage or corrosion
3. Check the O2 sensor connections and wiring for proper continuity
4. Test the O2 sensor reference voltage circuit for voltage output
5. If necessary, perform a pinpoint test to identify the exact cause of the fault

How to fix DTC P22BB on BMW

To fix DTC P22BB on a BMW, you can try the following solutions:

1. Replace the faulty O2 sensor
2. Repair any open or short circuits in the reference voltage circuit
3. Clean or repair any corroded connections in the wiring harness
4. If needed, replace the Engine Control Module (ECM)

How to erase DTC P22BB on BMW

To erase DTC P22BB on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After fixing the underlying issue that caused the fault code, you can then reset the ECM and clear the code to turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.