P22EE – BMW DTC

BMW DTC P22EE – Cylinder 6 Alternative Fuel Injector Control Circuit Low

DTC P22EE meaning on BMW

The DTC P22EE fault code on a BMW indicates an issue with the Cylinder 6 Alternative Fuel Injector Control Circuit being detected as low. This means that there is a problem with the control circuit for the alternative fuel injector in cylinder 6, which could lead to improper fuel delivery and affect the engine’s performance.

BMW DTC P22EE symptoms

Some common symptoms associated with the BMW DTC P22EE fault code may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Engine misfires or rough idling
• Reduced engine power or performance
• Increased fuel consumption

BMW DTC P22EE causes

The potential causes of the DTC P22EE fault code on a BMW can vary, but some common reasons include:

• Faulty alternative fuel injector in cylinder 6
• Wiring or connector issues in the control circuit
• ECU (Engine Control Unit) malfunction
• Fuel system problems

BMW DTC P22EE seriousness

Ignoring the DTC P22EE fault code on a BMW can lead to further engine performance issues and potential damage. It is important to address this fault code promptly to prevent any long-term problems and ensure the vehicle operates efficiently.

How to diagnose DTC P22EE on BMW

When diagnosing the DTC P22EE fault code on a BMW, the following steps can be taken:

1. Use a diagnostic scanner to retrieve the fault codes and data related to the Cylinder 6 Alternative Fuel Injector Control Circuit
2. Inspect the wiring and connectors for any visible damage or corrosion
3. Test the alternative fuel injector in cylinder 6 for proper operation
4. Check the ECU for any faults or malfunctions

How to fix DTC P22EE on BMW

To address the DTC P22EE fault code on a BMW, the following steps can be taken:

1. Replace the faulty alternative fuel injector in cylinder 6 if necessary
2. Repair or replace any damaged wiring or connectors in the control circuit
3. If the ECU is found to be faulty, it may need to be reprogrammed or replaced
4. Ensure the fuel system is functioning correctly

How to erase DTC P22EE on BMW

After addressing the underlying issue causing the DTC P22EE fault code on a BMW, the code can be cleared using a diagnostic scanner. Follow these steps to erase the fault code:

1. Connect the diagnostic scanner to the vehicle’s OBD-II port
2. Select the option to clear fault codes from the ECU
3. Follow the on-screen prompts to erase the DTC P22EE code
4. Verify that the code has been successfully cleared by rescanning the system

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.