P2320 – BMW DTC

BMW DTC P2320 – Ignition Coil ‘G’ Secondary Circuit

DTC P2320 meaning on BMW

The Diagnostic Trouble Code (DTC) P2320 for BMW indicates a fault in the ignition coil ‘G’ secondary circuit. This means that there is an issue with the electrical circuit that controls the ignition coil for cylinder ‘G’ in the engine.

BMW DTC P2320 symptoms

Symptoms of DTC P2320 on a BMW may include:

• Engine misfires
• Rough idling
• Lack of power
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P2320 causes

Common causes of DTC P2320 on a BMW include:

• Defective ignition coil ‘G’
• Wiring or connector issues in the ignition coil circuit
• ECU (Engine Control Unit) malfunction

BMW DTC P2320 seriousness

Ignoring DTC P2320 on a BMW can lead to potential engine performance issues, increased fuel consumption, and further damage to engine components. It is important to address this code promptly to prevent more severe problems.

How to diagnose DTC P2320 on BMW

To diagnose DTC P2320 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and confirm P2320.
2. Inspect the ignition coil ‘G’ and its wiring for any visible damage or corrosion.
3. Check the connectors and wiring harness for proper connection and continuity.
4. Perform a resistance test on the ignition coil to determine if it is faulty.
5. Check the ECU for any stored codes related to the ignition system.

How to fix DTC P2320 on BMW

To fix DTC P2320 on a BMW, you can consider the following actions:

1. Replace the faulty ignition coil ‘G’ with a new one.
2. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
3. If the ECU is found to be faulty, it may need to be reprogrammed or replaced.
4. Clear the fault code using a diagnostic scanner after the repair is completed.

How to erase DTC P2320 on BMW

To erase DTC P2320 on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Access the scanner’s menu to clear the fault codes stored in the ECU.
3. Follow the on-screen instructions to erase the DTC P2320 code.
4. Once the code is cleared, start the engine and ensure the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.