P2336 – BMW DTC

BMW DTC P2336 – Cylinder 1 Above Knock/Combustion Vibration Sensor Threshold

DTC P2336 meaning on BMW

DTC P2336 on a BMW indicates that there is a fault with the Cylinder 1 Above Knock/Combustion Vibration Sensor. This sensor is responsible for detecting abnormal vibrations or knocking in the combustion process of the engine cylinder 1. When the sensor detects that the vibrations or knocking exceed the predetermined threshold, it triggers the P2336 fault code.

BMW DTC P2336 symptoms

Symptoms of DTC P2336 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance
• In some cases, the engine may go into a limp mode

BMW DTC P2336 causes

The common causes of DTC P2336 on a BMW include:

• Defective Cylinder 1 Above Knock/Combustion Vibration Sensor
• Wiring or connector issues in the sensor circuit
• Engine mechanical problems causing abnormal vibrations

BMW DTC P2336 seriousness

While DTC P2336 may not always result in immediate engine failure, it is important to address this issue promptly. Ignoring the fault code can lead to potential engine damage or reduced performance over time. It is recommended to diagnose and fix the problem as soon as possible.

How to diagnose DTC P2336 on BMW

To diagnose DTC P2336 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and any related codes
2. Inspect the wiring and connectors of the Cylinder 1 Above Knock/Combustion Vibration Sensor for any damage or corrosion
3. Check the sensor itself for proper operation or replace it if necessary
4. Perform a visual inspection of the engine components for any signs of abnormal vibrations or knocking

How to fix DTC P2336 on BMW

To fix DTC P2336 on a BMW, you can try the following solutions:

1. Replace the faulty Cylinder 1 Above Knock/Combustion Vibration Sensor
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Address any underlying engine mechanical issues causing abnormal vibrations
4. Clear the fault code and test drive the vehicle to ensure the issue is resolved

How to erase DTC P2336 on BMW

To erase DTC P2336 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s engine control module. Once the code is cleared, you can reset the Check Engine Light and monitor the vehicle for any recurring issues. It is important to ensure that the underlying problem causing the fault code has been properly addressed before clearing the code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.