BMW DTC P2354 – Cylinder 10 Pressure Sensor Circuit Low
DTC P2354 meaning on BMW
DTC P2354 on a BMW indicates a low voltage condition in the cylinder 10 pressure sensor circuit. This fault code is specific to the pressure sensor in cylinder 10, which is used to monitor the combustion pressure in that cylinder. The Engine Control Module (ECM) detects that the voltage signal from the pressure sensor is below the expected range, indicating a potential issue with the sensor or its circuit.
BMW DTC P2354 symptoms
Symptoms of DTC P2354 on a BMW may include:
- Check Engine Light (MIL) illuminated
- Engine running rough
- Reduced engine power
- Poor fuel economy
BMW DTC P2354 causes
Common causes of DTC P2354 on a BMW include:
- Faulty cylinder 10 pressure sensor
- Wiring or connector issues in the pressure sensor circuit
- ECM software or hardware problems
BMW DTC P2354 seriousness
While DTC P2354 may not always result in immediate drivability issues, it is important to address this fault code promptly. Ignoring this fault can lead to potential engine performance problems and may cause further damage if left unresolved.
How to diagnose DTC P2354 on BMW
To diagnose DTC P2354 on a BMW, follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
- Inspect the wiring and connectors in the cylinder 10 pressure sensor circuit for any damage or corrosion.
- Test the cylinder 10 pressure sensor using a multimeter to check for proper voltage output.
- Check for any software updates available for the ECM that may address this issue.
How to fix DTC P2354 on BMW
To fix DTC P2354 on a BMW, consider the following steps:
- Replace the faulty cylinder 10 pressure sensor if it is determined to be the cause of the issue.
- Repair any damaged wiring or connectors in the pressure sensor circuit.
- If no physical issues are found, reflash or update the ECM software to the latest version.
How to erase DTC P2354 on BMW
To erase DTC P2354 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing the underlying issue causing the fault code, clearing the codes will reset the Check Engine Light and monitor the system for any recurring problems.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.