P2415 – BMW DTC

BMW DTC P2415 – O2 Sensor Exhaust Sample Error (Bank 2 Sensor 1)

DTC P2415 meaning on BMW

DTC P2415 on a BMW indicates an O2 Sensor Exhaust Sample Error for Bank 2 Sensor 1. This fault code is triggered when the ECM (Engine Control Module) detects that the oxygen sensor in the exhaust system is not providing accurate readings or is malfunctioning.

BMW DTC P2415 symptoms

Symptoms of DTC P2415 on a BMW may include:

  • Check Engine Light illuminated on the dashboard
  • Decreased fuel efficiency
  • Engine running rough or misfiring
  • Reduced engine performance

BMW DTC P2415 causes

Common causes of DTC P2415 on a BMW include:

  • Failed O2 sensor (Bank 2 Sensor 1)
  • Wiring or connector issues in the O2 sensor circuit
  • Exhaust leaks near the O2 sensor
  • ECM software or hardware issues

BMW DTC P2415 seriousness

While DTC P2415 may not cause immediate drivability issues, it can lead to decreased fuel efficiency and potentially harm the engine over time if left unresolved. It is recommended to address this fault code promptly to prevent further damage.

How to diagnose DTC P2415 on BMW

To diagnose DTC P2415 on a BMW, a mechanic would typically perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
  2. Inspect the wiring and connectors related to Bank 2 Sensor 1 O2 sensor
  3. Check for exhaust leaks near the O2 sensor
  4. Test the O2 sensor using a multimeter or scan tool
  5. Verify the ECM software for any updates or issues

How to fix DTC P2415 on BMW

To fix DTC P2415 on a BMW, the following steps may be taken:

  1. Replace the Bank 2 Sensor 1 O2 sensor if faulty
  2. Repair any damaged wiring or connectors in the O2 sensor circuit
  3. Fix any exhaust leaks near the O2 sensor
  4. Update the ECM software if necessary

How to erase DTC P2415 on BMW

After addressing the underlying issue causing DTC P2415 on a BMW, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow the ECM to monitor the system for any new faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.