P2441 – BMW DTC

BMW DTC P2441 – AIR System Switching Valve Stuck Closed (Bank 1)

DTC P2441 meaning on BMW

DTC P2441 indicates that the AIR (Air Injection Reaction) System Switching Valve for Bank 1 is stuck closed on a BMW vehicle. The AIR system is responsible for injecting fresh air into the exhaust system to help reduce emissions. When the switching valve is stuck closed, it can disrupt the proper functioning of the AIR system.

BMW DTC P2441 symptoms

Symptoms of DTC P2441 on a BMW may include:

  • Check Engine Light illuminated
  • Reduced engine performance
  • Increased emissions
  • Possible rough idling or stalling

BMW DTC P2441 causes

The common causes of DTC P2441 on a BMW include:

  • Faulty AIR System Switching Valve
  • Wiring or connector issues in the AIR system circuit
  • Carbon buildup or debris blocking the valve

BMW DTC P2441 seriousness

While DTC P2441 may not cause immediate drivability issues, it can lead to increased emissions and potential long-term engine problems if left unresolved. It is important to address this issue promptly to ensure proper vehicle performance and emissions compliance.

How to diagnose DTC P2441 on BMW

To diagnose DTC P2441 on a BMW, a mechanic may perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault code
  2. Inspect the AIR System Switching Valve for Bank 1 for any physical damage or blockages
  3. Check the wiring and connectors in the AIR system circuit for any issues
  4. Perform a smoke test to check for leaks in the AIR system

How to fix DTC P2441 on BMW

To fix DTC P2441 on a BMW, the following steps may be taken:

  1. Replace the faulty AIR System Switching Valve for Bank 1
  2. Repair any damaged wiring or connectors in the AIR system circuit
  3. Clean out any carbon buildup or debris blocking the valve
  4. Clear the fault code and reset the Check Engine Light

How to erase DTC P2441 on BMW

To erase DTC P2441 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s computer. Once the issue has been addressed and fixed, clearing the code will reset the Check Engine Light and ensure that the system is functioning properly.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.