P245A – BMW DTC

BMW DTC P245A – EGR Cooler Bypass Control Circuit/Open (Bank 1)

DTC P245A meaning on BMW

DTC P245A indicates an issue with the EGR (Exhaust Gas Recirculation) Cooler Bypass Control Circuit on Bank 1 in a BMW vehicle. This fault code specifically points to an open circuit in the control system responsible for managing the EGR cooler bypass function.

BMW DTC P245A symptoms

Symptoms of DTC P245A in a BMW may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Engine stalling or rough idling

BMW DTC P245A causes

Common causes of DTC P245A on a BMW include:

• Faulty EGR cooler bypass control solenoid
• Open or short circuit in the wiring harness related to the EGR cooler bypass control circuit
• Defective EGR cooler bypass valve
• Issues with the EGR system components

BMW DTC P245A seriousness

While DTC P245A may not always result in immediate drivability issues, it is important to address this fault code promptly to prevent potential damage to the engine and emissions system. Ignoring this fault could lead to reduced engine efficiency and increased emissions output.

How to diagnose DTC P245A on BMW

To diagnose DTC P245A on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the EGR cooler bypass control circuit for any visible damage or loose connections
3. Test the EGR cooler bypass control solenoid and valve for proper operation
4. Check the wiring harness for continuity and shorts
5. Perform a smoke test to check for leaks in the EGR system

How to fix DTC P245A on BMW

To fix DTC P245A on a BMW, consider the following steps:

1. Replace the faulty EGR cooler bypass control solenoid or valve
2. Repair any damaged wiring in the EGR cooler bypass control circuit
3. Clean or replace the EGR system components if necessary
4. Clear the fault code and perform a test drive to ensure the issue is resolved

How to erase DTC P245A on BMW

To erase DTC P245A on a BMW, use a diagnostic scanner to clear the fault code from the vehicle’s ECU memory. After clearing the code, perform a test drive to verify that the issue has been successfully resolved. If the fault code reappears, further diagnosis and repairs may be necessary.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.