P2470 – BMW DTC

BMW DTC P2470 – Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 4)

DTC P2470 meaning on BMW

The Diagnostic Trouble Code (DTC) P2470 for BMW refers to the Exhaust Gas Temperature Sensor Circuit Low on Bank 1 Sensor 4. This code indicates that the signal from the exhaust gas temperature sensor located after the diesel particulate filter is reading lower than the expected range.

BMW DTC P2470 symptoms

Symptoms of DTC P2470 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance or power
• Increased fuel consumption
• Possible regeneration issues with the diesel particulate filter

BMW DTC P2470 causes

The common causes of DTC P2470 on a BMW include:

• Defective exhaust gas temperature sensor
• Wiring or connector issues in the sensor circuit
• Faulty engine control module (ECM)
• Exhaust system leaks or damage

BMW DTC P2470 seriousness

While DTC P2470 may not cause immediate drivability issues, it is important to address this code promptly to prevent potential damage to the engine or emissions system. Ignoring this code can lead to increased fuel consumption and emissions, as well as potential long-term engine damage.

How to diagnose DTC P2470 on BMW

To diagnose DTC P2470 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors related to the exhaust gas temperature sensor
3. Test the exhaust gas temperature sensor for proper operation
4. Check for exhaust leaks or damage in the system
5. Verify the functionality of the engine control module (ECM)

How to fix DTC P2470 on BMW

To fix DTC P2470 on a BMW, consider the following steps:

1. Replace the faulty exhaust gas temperature sensor
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Address any exhaust system leaks or damage
4. If necessary, reprogram or replace the engine control module (ECM)

How to erase DTC P2470 on BMW

To erase DTC P2470 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After addressing the underlying issue causing the code, clearing the code will reset the Check Engine Light and monitor the system for any recurring faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.