BMW DTC P2477 – Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic (Bank 2 Sensor 4)
DTC P2477 meaning on BMW
DTC P2477 indicates an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit on Bank 2 Sensor 4 in a BMW vehicle. This fault code is triggered when the Engine Control Module (ECM) detects intermittent or erratic signals from the EGT sensor, which is responsible for monitoring the exhaust gas temperature.
BMW DTC P2477 symptoms
Symptoms of DTC P2477 in a BMW may include:
- Check Engine Light illuminated
- Reduced engine performance
- Increased fuel consumption
- Possible engine misfires
BMW DTC P2477 causes
The common causes of DTC P2477 on a BMW include:
- Faulty Exhaust Gas Temperature (EGT) Sensor
- Wiring or connector issues in the EGT sensor circuit
- ECM software or hardware problems
BMW DTC P2477 seriousness
While DTC P2477 may not cause immediate drivability issues, it is important to address this fault code promptly to prevent potential damage to the engine or emissions system. Ignoring this fault could lead to more severe problems over time.
How to diagnose DTC P2477 on BMW
To diagnose DTC P2477 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the wiring and connectors related to the Bank 2 Sensor 4 EGT sensor
- Test the EGT sensor for proper resistance and signal output
- Check for any software updates for the ECM
How to fix DTC P2477 on BMW
To fix DTC P2477 on a BMW, you can try the following solutions:
- Replace the faulty Bank 2 Sensor 4 EGT sensor
- Repair any damaged wiring or connectors in the EGT sensor circuit
- Update the ECM software to the latest version
How to erase DTC P2477 on BMW
To erase DTC P2477 on a BMW, you can clear the fault code using a diagnostic scanner that has the capability to reset codes. Once the issue has been addressed and fixed, clearing the code will turn off the Check Engine Light.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.