P2481 – BMW DTC

BMW DTC P2481 – Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 5)

DTC P2481 meaning on BMW

The Diagnostic Trouble Code (DTC) P2481 for BMW refers to an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit on Bank 1 Sensor 5. This code indicates that the signal from the EGT sensor located in Bank 1 Sensor 5 is reading lower than the expected range.

BMW DTC P2481 symptoms

Symptoms of DTC P2481 on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Possible increase in fuel consumption
• Engine running rough or misfiring

BMW DTC P2481 causes

Common causes of DTC P2481 on a BMW include:

• Defective Exhaust Gas Temperature (EGT) Sensor
• Wiring or connector issues in the EGT sensor circuit
• Faulty Engine Control Module (ECM)
• Exhaust system leaks or damage

BMW DTC P2481 seriousness

While DTC P2481 may not always result in immediate drivability issues, it is important to address this code promptly to prevent potential damage to the engine or emissions system. Ignoring this code can lead to increased fuel consumption and reduced engine performance.

How to diagnose DTC P2481 on BMW

To diagnose DTC P2481 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the wiring and connectors related to the EGT sensor
3. Test the EGT sensor for proper resistance and voltage readings
4. Check for exhaust leaks or damage in the system
5. Verify the operation of the Engine Control Module (ECM)

How to fix DTC P2481 on BMW

To fix DTC P2481 on a BMW, you can try the following solutions:

1. Replace the faulty Exhaust Gas Temperature (EGT) Sensor
2. Repair any damaged wiring or connectors in the EGT sensor circuit
3. Address any exhaust system leaks or damage
4. If necessary, replace the Engine Control Module (ECM)

How to erase DTC P2481 on BMW

To erase DTC P2481 on a BMW, you can use a diagnostic scanner to clear the fault code from the Engine Control Module (ECM) memory. After fixing the underlying issue causing the code, clearing the code will reset the Check Engine Light and monitor the system for any recurring faults.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.