BMW DTC P2486 – Exhaust Gas Temperature Sensor Circuit Low (Bank 2 Sensor 5)
DTC P2486 meaning on BMW
The Diagnostic Trouble Code (DTC) P2486 for BMW refers to an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit on Bank 2 Sensor 5. This code indicates that the signal from the EGT sensor located in Bank 2 Sensor 5 is reading lower than the expected range.
BMW DTC P2486 symptoms
Symptoms of DTC P2486 on a BMW may include:
- Check Engine Light illuminated
- Reduced engine performance
- Increased fuel consumption
- Possible engine misfires
BMW DTC P2486 causes
Common causes of DTC P2486 on a BMW include:
- Defective Exhaust Gas Temperature Sensor
- Wiring or connector issues in the EGT sensor circuit
- Exhaust system leaks
- Software or calibration issues
BMW DTC P2486 seriousness
While DTC P2486 may not cause immediate drivability issues, it is important to address this code promptly to prevent potential damage to the engine or emissions system. Ignoring this code can lead to increased fuel consumption and reduced engine efficiency.
How to diagnose DTC P2486 on BMW
To diagnose DTC P2486 on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the wiring and connectors related to Bank 2 Sensor 5
- Check the EGT sensor for proper operation
- Perform a visual inspection of the exhaust system for leaks
How to fix DTC P2486 on BMW
To fix DTC P2486 on a BMW, you can try the following solutions:
- Replace the faulty Exhaust Gas Temperature Sensor
- Repair any damaged wiring or connectors in the EGT sensor circuit
- Address any exhaust leaks in the system
- Update the engine control module software if necessary
How to erase DTC P2486 on BMW
To erase DTC P2486 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the engine control module. After fixing the underlying issue causing the code, clearing the code will reset the Check Engine Light and monitor the system for any recurring faults.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.